This cam meets the 2012 Builder's Prepared class rules. Requires an upgraded spring package, billet rod, and flywheel. It's also a great...
$89.10
Add:
This cam is to be used in mild modified applications. It will require an upgraded spring package, billet rod, and billet flywheel. The lobes are...
$175.82
Add:
Description This cam has very aggressive ramps and requires an upgraded spring package, billet rod, and flywheel. Use bored stock or Tillotson carb....
$175.82
Add:
The 308 is our most popular grind for modified clone class. This cam is easy on the valve train and has a very wide power band. This cam requires an...
$175.82
Add:
Description The MOD1 has a very wide power band that makes slightly more top end power than the 308 grind, and is easy on the valve train. The MOD1...
$175.82
Add:
Dyno-Cams Camshaft for GX200 Billet NEW We now offer Billet Steel Camshafts. These cams use a Billet 4140 steel shaft/core. The lobes are groove...
$295.06
... more info
Camshaft, 252-0207 SPECIAL HIGH TORQUE GRIND FOR SMALL TRACKS, 6000 rpm, 18 lb Springs Required, 26 recommended. 10 to 1 Compression or recommend,...
$185.17
Add:
Description The 255 is a great choice for cheater stock or mild modified. You can expect a 1 to 1.5 hp gain in the upper RPM range over a legal stock...
$178.82
Add:
NEW Camshaft 274-0207, Super High Torque, Use for small to medium tracks. 4500 to 7500 rpm range, 11 to 1 or higher compression ratio...
$185.17
Add:
Camshaft 274-0607, 8500 RPM, 12 to 1 or higher compression ratio required, Big Track Cam, 26 lb Springs Required. Warning - May cause traction...
$185.17
Add:
Camshaft, BSP Race Cam
$34.43
Add:
The DynoCams CL2 R2 is legal for the current profile rules for stock classes. Engine: 196cc OHV Clone Recommended Class: All Stock Classes Target...
$69.95
Add:
Camshaft, CL-2 Box Stock Cam Dyno Cams * Released 4/26/2013 the CL-2 cam from Dyno Cams is the latest for the Box Stock class The newly designed...
$69.95
Add:
The CL3 utilizes the -5 duration check, in the AKRA rule package, by allowing a softer ramp rate on the nose of the cam. This design has shown gains...
$69.95
Add:
The CL4 is specifically designed for the NKA rule package. With no minimum duration requirements, we were able to smooth the nose of the cam allowing...
$69.95
Add: