| Product Image |
Item Name- |
Price |
 |
Animal Throttle Linkage Kit bolts to plastic cover or control plate. Anodized black w/ zinc coated steel end brackets. Clevises, wrench, brass... |
$39.77
Add:
|
 |
Double wire stop Throttle cable around gas pedal or any other guy wire application. |
$6.89
Add:
|
 |
Fuel Line Clip / 1 size fits 1/4 and 3/16" These clips are reusable and fit tight on many different size Fuel LineSold In Signals. Style and... |
$2.42
Add:
|
 |
Pulse Fitting Straight 1/4" Fuel Line Fuel Pump Pulse Fitting, Must drill and tap for 1/8" NPT |
$3.38
Add:
|
.JPG "Fuel Tank Cap G-Man Tanks some Aluminum") |
Fuel Tank Cap G-Man Tanks some Aluminum |
$6.90
Add:
|
|
Fuel Tank Cap With Gasket KG Fits 8.5L Senior and 3.5L Junior Tank |
$6.90
Add:
|
 |
Fuel Tank, Pep Cock G-Man 1/4 NPT 1/4 Barb Shut off |
$10.38
Add:
|
 |
Manifold Spacer, with Pulse Fitting. Aluminum spacer with pulse fitting can be used either in front or behind carb. Run your fuel pump without... |
$25.17
Add:
|
 (2).JPG "Pulse Fitting 1/4\" Fuel Line Short") |
Pulse Fitting Short 1/4" Fuel Line Fuel Pump Pulse Fitting, Must drill and tap for 1/8" NPT - Cut half the size |
$4.14
Add:
|
 |
Pulse Fitting 90° 1/4" Fuel Line Fuel Pump Pulse Fitting, Must drill and tap for 1/4" NPT |
$6.19
Add:
|
 |
PULSE FITTING, SCREW IN - Billet aluminum pulse fitting, provides a crankcase pulse to operate the fuel pump. Screws into the top oil fill area of... |
$11.13
Add:
|
 |
Nut, Throttle Rod Cable Nut Screws onto Rod 1/4"-28 Thread |
$5.51
Add:
|
 |
Jr. Short Throttle Rod Assy Comp * Rod, Nut, Spring & Pull Nut 1/4"-28 thread |
$46.14
Add:
|
|
New Throttle Rod Assy Comp * Rod, Nut, Spring & Pull Nut |
$46.14
Add:
|
 |
THROTTLE CABLE, BIG BARREL END 64" WITH CLEAR COATING. |
$5.98
Add:
|
 |
Throttle Cable Connector w/Ferrule |
$3.50
Add:
|
 |
THROTTLE CABLE, STAINLESS STEEL, EXTRA FLEXIBLE , BALL END .192" 54" long |
$6.40
Add:
|
 |
Throttle Cable Stainless w/small barrel 76 inch Fits LO206 Walbro Carb as well the Mikuni slide carbs Throttle, Cable SM/Barrel 76" * Barrel DIA... |
$5.00
Add:
|
.jpg "Throttle Cable Stop") |
Throttle Cable Stop, barrel type |
$3.46
Add:
|
 |
Slide carburetor throttle linkage kit complete with all hardware for Animal, LO206, Honda, Clone. Big / Small Block. Works with Most... |
$39.94
Add:
|
 |
Throttle, Spring Fine Regulating Carb Throttle |
$2.56
Add:
|
.JPG "Throttle Spring Return") |
Throttle return spring |
$3.45
Add:
|
 |
Throttle, Cable 60" with Jacket Black Ball on one end - barrel on the other |
$11.04
Add:
|
 |
Throttle, Housing, Blk STD sold by the foot. |
$3.25
Add:
|
 |
Throttle, Housing, Red STD sold by the foot. |
$3.89
Add:
|
 |
Governor Rod |
$4.14
Add:
|
.JPG "Throttle Rod") |
Throttle Rod Rookie 11" |
$13.80
Add:
|
.JPG "Fuel Line Tygon 1/4\" I.D. /Foot") |
Fuel Line Tygon 1/4" I.D. /Foot Will not harden up. Yellow clear |
$3.59
Add:
|
.JPG "Fuel Line Tygon 3/16 I.D. /Foot") |
Fuel Line Tygon 3/16 I.D. /Foot Will not harden up. Yellow clear |
$4.97
Add:
|
 |
BLUE Fuel Line by the foot Durable and Pliable To order, use quantity to show how many feet of hose needed. |
$1.38
Add:
|
 |
1/4 Fuel Line Clear PVC Tubing cut to order on Clearance. |
$1.38
Add:
|
 |
1/4 Fuel Line Red PVC Tubing cut to order by the foot |
$1.38
Add:
|
.JPG "Fuel Line Reducer 1/4\" - 3/16\"") |
Fuel Line Reducer 1/4" - 3/16" |
$2.76
Add:
|
 |
RLV Fuel Filter 1/4" |
$5.18
Add:
|
 |
MOUNTING PLATE FOR FUEL PUMP (Note: Must drill holes to install). For Hondas and Yellow Clones only. |
$20.70
Add:
|
 |
ARC Throttle Kit - CNC machined from 1/8" aluminum plate. All the parts for the throttle mechanism that do not come with an engine are included... |
$43.66
Add:
|
 |
This torsion spring can be used with both of our top plates. It can be used to replace the stock long spring if desired. |
$2.62
Add:
|
 |
ARC Throttle Kit - Replacement for Linkages |
$6.90
Add:
|
|
ARC Throttle Kit - CNC machined from 1/8" aluminum plate. All the parts for the throttle mechanism that do not come with an engine are included... |
$43.66
Add:
|
 |
Top Plate, PMI Clone Black all parts included with instructions. |
$50.10
Add:
|
 |
ASN / AKRA / WKA Legal Top plate for GX Serise Classes. Clone top plate has a cut design so that more air can get to the motor to prevent... |
$50.10
Add:
|
 |
Clevis Pin with Set Screw for Throttle Linkage to adapt to your Top Plate. |
$5.52
Add:
|
 |
ARC introduces a new Top Plate/Throttle Control Assembly for the Honda GX340/GX390 Engines This Part is made with quality components and the same... |
$39.95
Add:
|
 |
FUEL PUMP, Mikuni, Pulse Operated, Plastic Housing |
$27.60
Add:
|
 |
Fuel, Rebuild Kit For WMS Pump Square |
$15.88
Add:
|
 |
Walbro Fuel Pump, Pulse Operated, Plastic Housing, Use for Alky applications |
$34.46
Add:
|
 |
Fuel, Walbro Pump Round |
$29.49
Add:
|
 |
Walbro Round Pump Rebuild Kit |
$11.55
Add:
|
 |
Mikuni DF44 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or... |
$38.41
Add:
|
.JPG "Mikuni Fuel Pump Round") |
Mikuni Fuel Pump, Dual Outlet, Round Pump |
$47.15
Add:
|
.JPG "Mikuni Fuel Pump Rebuild Kit") |
Round Mikuni Fuel Pump Rebuild Kit |
$19.30
Add:
|
 |
Mikuni fuel pump rectangle style replacement gaskets |
$13.80
Add:
|
.JPG "3.5L Gas Tank Removable") |
3.5L Gas Tank Removable with butterfly clamp and wing nut. |
$89.56
Add:
|
.JPG "8.5L Gas Tank Removable") |
8.5L Gas Tank Removable with butterfly clamp and wing nut. |
$104.83
Add:
|
 |
Floor pan mounted 2.5 qt Fuel Tank. This tank shows that CBI has listened to the needs of the racers. The tank is low profile and fits on the... |
$63.15
Add:
|
 |
Plastic Fuel Tank. 3 1/2 qt. capacity. Mounts on the steering shaft. Comes with mounting hardware. |
$113.94
Add:
|
 |
Plastic Fuel Tank, 2qt 19.5 cm Long x 10.5 cm Wide x 16 cm High including Cap. Fuel tank may differ from picture due to avalibility.... |
$42.30
Add:
|
 |
Genuine Honda, New take off . Many have some minor scratches or dirt from storage/handling. |
$34.57
Add:
|
.JPG "Take off gas take Clone") |
Take Off Gas Tank fit Honda GX160 / GX200 and GX200 Clone's Color varies |
$31.74
Add:
|
 |
Honda Original Parts Carb Insulator, Standard stock w/vacuum (Pulse) take-off connection. Honda part # 16211-ZFS-D40 |
$12.75
Add:
|
 |
This Metal Catch can has 2 inlets for fuel and oil and one breather plus a drain. 2 Steel Clamps come with Catch can. |
$38.65
Add:
|
 |
Catch Can with mounting hardware and filter. |
$19.50
Add:
|
 |
Fuel recovery tank complete. |
$20.26
Add:
|
.JPG "KG Foot Rest")
